Mesh Wire Netting Industry Co., Limited
Model No.: W-1507
Material: Steel Wire
Cross Sectional Shape: Oval
Application: Construction Wire Mesh, Protecting Mesh
Surface Treatment: Black
Metal Wire Drawing: Cold Drawing
Status: Hard State
Thickness: Metal Thick Wire
Galvanized Technique: Hot Dipped Galvanized
Wire Material: Carbon Steel Spring Wire
Wire Length: 12",16",17",20",24",26"
Wire Thickness: 0.086" To 0.088"
Packing: 100pcs,200pcs,500pcs Per Box
Packaging: pallet or wooden carton
Productivity: 20 tons per month
Place of Origin: Hebei,China
Supply Ability: 30 tons per month
HS Code: 7326209000
galvanized Insulation Support Wire sharp edge
galvanized insulation support wire/sharp edge support wire/support wire thickness
Insulation supports are cut strips of wire used to keep insulation in place. Simply place the Supports between the wooden floor joists and the 45º angle tip will dig into the wood, securing itself and your insulation. All of our Insulation Supports are cut from 13 gauge Carbon Steel Spring Wire for optimum flexibility and strength.
Below are the different choices we offer our customers.
Choose Insulation Supports that are 12" - 36" long, or any length in between.
We package our Insulation Supports in 100 or 500 count boxes.
How to insulate a crawlspace?
To start, gather the tools and materials you will need. These include 10 or 12 mil polyethylene sheeting, pieces of wood or furring strips, several large rocks or boards, the proper amount of fiber glass insulation, a knife to cut the insulation, nails and a hammer.
1. Cover the ground with the polyethylene sheeting, overlapping joints by 12" or more. Then use the rocks or boards to hold the material in place. This will prevent ground moisture from entering the space, rising to the flooring above and causing mold or wood rot.
2 Next, if the crawlspace walls have any vents, close them so insulation can be placed over them. Seal them if necessary.
3 Measure the distance from the top of the band joist down the wall extending two feet out along the ground. Multiply by the wall perimeter to get the number of square feet of insulation you`ll need.
4 Cut the strips of insulation to the appropriate length.
5 Fasten each strip to insulate the band joist at the top of the wall by nailing a furring strip over the insulation. It will now hang down the wall and extend two feet onto the floor resembling an L shape.
Packing as below:
Copyright © 2019 Mesh Wire Netting Industry Co., Limited All rights reserved.